Rack N Ride ALUMINIUM MX Carrier


5 Year Structural Warranty and Designed for serious off road use.

Aluminium version of our MX Carrier, lighter and more versatile.

46lbs minus the loading ramp or 57lbs incl ramp.

Standard all steel version is 70lbs incl loading ramp.

Only the Bike Channel is Aluminium, all other parts are the same as the standard Steel MX Carrier.

For bikes up to 330lbs

Carrier is supplied with everything needed to use it: Snap Hooks, Turnbuckles, Shackles, Loading Ramp, Anti Tilt Bracket with Packer Plates for snug receiver fit, Strap to stop turnbuckles vibrating loose.

Price includes LED light kit with number plate light plus a place to bolt an licence plate where it shines.

LED kit in these pictures is the Australian version, US LED kit is pictured on the standard Steel MX Carrier

    Standard length fits 95% of vehicles.

    Jeeps with spare tire on rear will need a longer bar.

    See fitment details at bottom of page or email for more info.

    Standard 50" Steel ramp is included, measure out 50" from top of your tow bar to check loading angle.




On ordering there is a “NOTES” section as you go through to check out, let me know the vehicle and bike, if I think there’s any issues I’ll contact you.


Center of Bike Channel is 19 3/4″ from the center of the Hitch Pin hole.

Your bikes inside foot peg is 9″ from the center of the Hitch Pin hole.

For 95% of vehicles the standard length Main Bar is fine.

Usually only vehicles like Jeeps with Spare tire on the back may need a bit more length.

Style side trucks even with a canopy do not need a longer Main Bar.


If you run a tape out 50″, 60″, 70″ from the top of your tow bar receiver to the ground you’ll see the loading angle.

50″ Ramp – On a standard height 4WD (hitch is 17″-21″ off the ground) your bike is easy to load.

60″ Ramp – If you have a 2″ lift or your receiver is 22″ off the ground you’ll need this.

70″ Ramp – Higher lifts and bigger tires will need this.

Email me with any fitment questions.